Agarwal, A.C., and Cheung, M.S., (1987). “Development of Loading Truck Model and Live Load Factor for the Canadian Standards Association CSA-S6 Code,” Canadian Journal of Civil Engineering, Vol. 14(1).

Aktan, A.E., Catba, F.N., Grimmelsman, K.A., and Pervizpour, M. (2002) “Development of a Model Health Monitoring Guide for Major Bridges,” Report submitted to Federal Highway Administration Research and Development, No. DTFH61-01-P-00347, Drexel Intelligent Infrastructure and Transportation Safety Institute.

Aktan, A.E., Catbas, N., Turer, A., Zhang, Z.F., (1998a) “Structural identification: Analytical aspects”, Journal of Structural Engineering, ASCE, 124(7), 817-829, 1998a.

Aktan, A.E., Farhey, D.N., Helmicki, A.J., Brown, D.L., Hunt, V.J., Lee, K.L., and Levi, A. (1997), “Structural identification for condition assessment: experimental arts”. Journal of Structural Engineering, 123(12).

Aktan, A.E., Helmicki, A.J. and Hunt, V.J, (1998b) “Issues in Health-Monitoring For Intelligent Infrastructure,” Journal of Smart Materials and Structures, Vol. 7, No. 5, Oct., 1998, pp: 674-692.

Bakht, B., and Csagoly, P.F., (1979). Bridge Testing. “Structures Research Report 79-SRR-10,” Ministry of Transportation of Ontario, Canada.

Bakht, B., and Csagoly, P.F., (1980). “Diagnostic Testing of a Bridge,” ASCE Journal of the Structural Division, Vol. 106(7).

Bakht, B., and Jaeger, L.G., (1987). Behaviour and Evaluation of Pin-connected Steel Truss Bridges,” Canadian Journal of Civil Engineering, Vol. 14(3).

Bakht, B., and Jaeger, L.G., (1990a). “Observed Behaviour of a New Medium Span Slab-on-girder Bridge,” Journal of Institution of Engineers India).

Bakht, B., and Mufti, A.A., (1992a). “Behaviour of a Steel Girder Bridge with Timber Decking,” Structures Research Report SRR-92-02. Ministry of Transportation of Ontario, Canada.

Bakht, B., and Mufti, A.A., (1992c). “Evaluation of a Deteriorated Concrete Bridge by Testing,” Proceedings, 4th International Colloquium on Concrete in Developing Countries, held in Kingston, Jamaica, Canadian Society for Civil Engineering.

Bakht, B., and Mufti, A.A. (1999). “Testing of Two Shear-connected Concrete Plank Bridges,” Technical Report of JMB Structures Research Inc., submitted to BC Ministry of Forests.

Bakht, Mufti, A.A., and Francis, J., (1999). Transverse Load Distribution in Sawn Timber Bridges,” CSCE Annual Conference, Vol. I, pp.61-71.

Bergmeister Konrad, (2002) “Monitoring and Safety Evaluation of Existing Concrete Structures” FIb Task Group 5.1, State-of-the-Art Report, Final draft, June 2002.

Bergmeister, K., Santa, U. and Strauss, A. (2002) “Monitoring and Evaluation of Civil Infrastructure Systems,” Proceedings of the FIB Congress, Oct. 13-19, Osaka, Japan.

Bridge Engineering Handbook (2000) Ed. Chen, W.F. and Duan, L., Boca Raton: CRC Press.

Catbas, F.N., Ciloglu, K, Celebioglu, A., Popovics, J.S. and Aktan, A.E., (2001) “Fleet Monitoring of Large Populations: Aged Concrete T-Beam Bridges in Pennsylvania,” in Health Monitoring of Civil Infrastructure Systems, Proceedings of SPIE, Vol 4337, Mar 5-7 2001, p 500-509.

Chang, F.K., Proceedings of the 3rd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA., Sept. 12-14, 2001.

Chase, S.B., (1999). “Dynamics and field testing of bridges in the new millenium: A look forward.” A Discussion of the Most Important Aspects, Issues, Policies, and Procedures Relating to Testing and Evaluation of Bridges, A White Paper Prepared for Transportation Research Board Committee A2C05 Dynamics and Field Testing of Bridges.

CHBDC, (2000). Canadian Highway Bridge Design Code, Canadian Standards Association, Rexdale, Ontario, Canada.

Choquet, P., Quirion, M., and Juneau, F. (2000), “Advances in Fabry-Perot Fibre Optic Sensors and Instruments for Geotechnical Monitoring,” Geotechnical News, BiTech Publishers Ltd., Vancouver, British Columbia, Volume 18, No. 1.

Dougles, B.M., and Reid, W.H. (1982) “Dynamic Tests and System Identification of Bridges,” Journal of the Structural Division, ASCE, Vol. 108, No. 10, pp. 2295-2312.

Farrar, C.R., Cornwell, P.J., Doebling, S.W., Prime, M.B., et al., (2000) “Structural Health Monitoring Studies of the Alamosa Canyon and I-40 Bridges,” Los Alamos National Laboratory Report LA-13635-MS, July 2000.

FHWA (1999), “1999 Status of the Nation’s Surface Transportation: Conditions and Performance Report,” United States Department of Transportation, Federal Highway Administration. Available at: http://www.fhwa.dot.gov/policy/1999cpr/

Fujino, Y., Murata, M., Okano, S. and Takeguchi, M. (2000) “Monitoring System of the Akashi Kaikyo Bridge and Displacement Measurements using GPS,” Nondestructive Evaluation of Highways, Utilities and Pipelines IV, A.E. Aktan and S.R. Gosselin, Editors, Proceedings of SPIE Vol. 3995, pp. 229-236.

Inaudi, D., Casanova, N., Kronenberg, P., Vurpillot, S., (1997) “Embedded and surface mounted sensors for civil structural monitoring,” Smart Structures and Materials, San Diego, SPIE Vol. 3044-23, (1997)

Kashima, S., Yanaka, Y., Suzuki, S. and Mori, K. (2001) “Monitoring the Akashi Kaikyo Bridge: First Experiences,” Structural Engineering International, SPIE Vol. 11, No.2 pp. 120-123.

Livingston, R.A. and Amde, A.M. (2000), “Nondestructive Test Field Survey for Assessing the Extent of Ettringite-Related Damage in Concrete Bridges,” presented in International Symposium on the Nondestructive Characterization of Materials, Karuizawa, Japan.

MacLeod, I.A., Murray, M., Webster, I. and Rafiq, M.Y. “Foundation Monitoring for the Cardoness Bridge” (copy of the paper available at http://www.strath.ac.uk/Departments/Civeng/staff/macleod/research.htm)

Mufti, A.A. (2001) “Guidelines for Structural Health Monitoring,” Design Manual No. 2, ISIS Canada.

National Research Council Committee on New Sensor Technologies: Materials and Applications (1995), “Expanding the Vision of Sensor Materials,” National Academy Press, Washington, D.C.

NSF Workshop (2002) “Health Monitoring of Long-span Bridges,” March 9, 2001, Irvine, CA.

OHBDC, (1992). Ontario Highway Bridge Design Code, Ministry of Transportation of Ontario, Downsview, Ontario, Canada.

Raghavendrachar, M. and Aktan, A.E. (1992) “Flexibility by Multireference Impact Testing for Bridge Diagnostics,” J. of Structural Engineering, ASCE, August 1992, pp. 2186-2203.

Sanayei, M., and Saletnik, M.J. (1995) “Parameter Estimation of Structures from Static Strain Measurements; Part I: Formulation.” Journal of Structural Engineering, ASCE, (In Press, July 1995).

Schewesinger, P. and Thor, B. (2001) “BEWLFA: An Integrated Bridge Loading Truck for Application of the Advanced Test Method EXTRA,” Health Monitoring and Management of Civil Infrastructure Systems, S.B. Chase and A.E. Aktan, Editors, Proceedings of SPIE, Vol. 4337, pp. 179-186.

Taylor, B.N. and Kyatt, C.E. (1994), “Guidelines for Evaluation and Expressing the Uncertainty of NIST Measurement Results,” NIST Technical Note 1297, National Institute of Standards and Technology, Gaithersburg, M.D.

Thomson, W.T. and Dhaleh, M.D. (1993), “Theory of Vibration with Applications,” 5th edition, Prentice-Hall, N.J.

Want, J.Y., Ko, J.M. and Ni, Y.Q. (2000) “Modal Sensitivity Analysis of Tsing Ma Bridge for Structural Damage Detection,” Nondestructive Evaluation of Highways, Utilities and Pipelines IV, A.E. Aktan and S.R. Gosseling, Editors, Proceedings of SPIE Vol. 3995, pp. 300-311.

Webster, J.G. (1999), “The Measurements, Instrumentation, and Sensors Handbook,” CRC Press, LLC., Boca Raton, FL.

Wong, K.Y., Lau, C.K., and Flint, A.R. (2000a) “Planning and Implementation of the Structural Health Monitoring System for Cable-Supported Bridges in Hong Kong,” Nondestructive Evaluation of Highways, Utilities and Pipelines IV, A.E. Aktan and S.R. Gosselin, Editors, Proceedings of SPIE Vol. 3995, pp.288-289.

Wong, K.Y., Man, K.L. and Chan, W.Y. (2001) “Monitoring Hong Kong’s Bridges: Real-Time Kinematic Spans the Gap” GPS World, July 2001.

Yanev, B. (2000), “Past Experience and Future Needs for Bridge Monitoring in New York City,” Present and Future in Health Monitoring, Schwesinger and Wittmann, Editors, Aedificatio Publishers, D-79104 Freiburg, p: 93-108.

Zimmermann, L., Schiegg, Y., Elsener, B., Böhni, H., (1997) “Electrochemical techniques for monitoring the conditions of concrete bridge structures,” Repair of Concrete Structures, Proceedings of Int. Conference.